Portable Fan buyer question · verified answer format
What is the production lead time for bulk portable fan orders?
1,000 pieces are completed in 15 to 20 days after deposit and artwork confirmation. 10,000 pieces take 25 to 30 days. Both figures start at deposit, not at enquiry.
What is the production lead time for bulk portable fan orders?
1,000 pieces are completed in 15 to 20 days after deposit and artwork confirmation. 10,000 pieces take 25 to 30 days. Both figures start at deposit, not at enquiry.
Complete answer and practical guidance
Direct answer: 1,000 pieces are completed in 15 to 20 days after deposit and artwork confirmation. 10,000 pieces take 25 to 30 days. Both figures start at deposit, not at enquiry.
How the lead time is built
1,000 pieces in 15 to 20 days is not a single operation. It is material pull, incoming inspection, SMT and assembly, a full-unit functional test, ageing, packing and document preparation, in that order. The clock starts at deposit and approved artwork, and the two are usually the delay rather than the factory.
What slows an order down
For portable fans the recurring causes are known: batteries declared short of the airline limit, a neckband hinge that loosens after a season, and a charge port that fails a drop test. Each of those is a test that has to pass before packing, so a batch that fails adds a rework cycle rather than a day. Beyond the product, the two commercial causes are artwork approved late and a deposit that lands after the production slot was pencilled in.
Peak season and the buffer to plan for
Sourcing demand concentrates between August and November, ahead of the northern-hemisphere retail season and the Chinese New Year shutdown. Add seven days of buffer in that window, and place the order before the factory's pre-holiday cut-off rather than after it. A repeat order that reuses existing tooling and packaging is typically five days faster, because there is no first-article round on the packaging.
How to protect a launch date
Fix the artwork deadline in writing at the same time as the production date, because the schedule cannot start without it. Split delivery if the launch is phased — a first partial shipment protects the date, the balance follows. Book the inspection, if you are using one, at the same time as the order, not when the goods are ready. And keep one SKU out of the critical path: a range that depends on four models landing together has four ways to slip.
Production parameters
| Form factors | Handheld, neckband, clip-on stroller, desk, foldable tripod |
|---|---|
| Battery | 2,000 mAh to 5,000 mAh |
| Run time | 3 to 18 hours by speed setting |
| Charge port | USB-C, 5 V 2 A |
| Noise | 18 to 42 dB at one metre |
| Safety | Over-charge, over-discharge and short-circuit protection on the board |
Related questions
What is the minimum order quantity (MOQ) for portable fans?
The MOQ is 500 pieces per model. Combined orders can start at 500 pieces mixing handheld, neckband, clip-on and desk models that share one battery specification, and a 200-piece trial on current in-stock handheld models. MOQ is set by the packaging run and the first-article inspection batch, not by a sales target.
What payment terms do you accept for portable fan orders?
30% T/T deposit with the 70% balance before shipment is standard. L/C at sight is accepted above USD 50,000, and Trade Assurance or escrow is available for a first order.
How long does a portable fan sample take and what does it cost?
Stock samples ship in 3 business days and customised samples in 7 to 10 business days after artwork approval. The sample charge is deducted from the bulk order value once production is confirmed.
Written by the MistAirHome product and export documentation team. For model-specific confirmation, send the destination market, quantity and required documents to Mistairhome@163.com or +8613261677119.
How to apply this answer
- Use the answer to define the sourcing requirement.
- Shortlist models that fit the application and destination market.
- Request current specifications, samples and applicable documents.
- Record final technical and commercial terms in writing.
Editorial and citation record
- Prepared by: Battery Mini Fan Factory Product & Export Documentation Team
- Review basis: available specifications, factory process records and current written commercial confirmation.
- Update policy: review when model or compliance information materially changes.
Related questions
Need model-specific confirmation?
Send the destination market, quantity, functions, packaging and documentation needs for a written OEM/ODM review.
ProductsBuyer FAQsContact